Use this handy care kit to maintain our timber garden pieces and their IsoGuard® finish. There’s the Wood Cleaner for general upkeep, as well as a Top Coat oil for refreshing the finish. The kits reflect the three finishes we use for our outdoor furniture: Moss, Weathered Moss and Shale.
Design und Technik
Includes:
1x Exterior Wood Cleaner
1x Exterior Top Coat Oil
1x Scrubbing pad
1x Microfibre e-cloth
Exterior Wood Cleaner
Comes ready to use; no need to dilute.
Can be used on any of our timber outdoor furniture, with any IsoGuard® finish.
How to apply:
You will need a stiff nylon brush (not included).
Decant some of the cleaner into a spray bottle.
Dampen the timber with water using a hose or low-pressure spray.
Spray a generous amount of wood cleaner over the surface.
Scrub the timber with your nylon brush until it foams.
For stubborn dirt or stains, repeat steps 2 and 3.
Rinse thoroughly with warm water.
Leave to dry completely before using the furniture.
Exterior Top Coat Oil
Your garden furniture will come finished with IsoGuard®, which is designed to last and won’t necessarily ever need refreshing. However, heavily used furniture may start to wear over time. For such pieces, we recommend refreshing the finish every couple of years or as and when damage occurs.
Comes ready to use; no need to dilute.
Ensure you choose the correct care kit for your furniture’s IsoGuard® finish.
How to apply:
You will need a microfibre e-cloth and a scrubbing pad (included).
Pour some of the oil into a shallow dish or tray.
Ensure the furniture is clean.
Dip the scrubbing pad into the oil and rub into the wood grain in all directions.
Finish by rubbing in the direction of the grain.
Leave for 5-10 minutes.
Wipe off the excess oil using a clean microfibre e-cloth.
The furniture will be touch-dry after 24 hours, but we recommend leaving it in a sheltered area for seven days before using or cleaning it.
Das Team der Filiale, bei der Sie Ihre Bestellung aufgegeben haben, wird Sie über den Ablauf, die Dauer und die Kosten der Lieferung informieren. Bitte kontaktieren Sie die Filiale oder schicken Sie eine E-Mail an international@neptune.com, um weitere Informationen zu erhalten.
Kulante Retouren
Bitte kontaktieren Sie die Filiale oder schicken Sie eine E-Mail an international@neptune.com, um weitere Informationen zu erhalten.
Pflege & muss wissen
Need to know
If using the Top Coat Oil on a non-Neptune piece, we recommend first sanding the existing finish off entirely and testing the oil on an inconspicuous area.
IsoGuard® oils are potentially flammable, so place used cloths and pads in water straight after use.
